
Grinding dust, welding fumes, and cutting smoke are constant byproducts of metalworking. Without the right system in place, they stay in the air your team breathes every shift.
Air Purifiers, Inc. designs, installs, and services metalworking dust collection systems for fabrication shops, machine shops, and manufacturers across CT, NY, NJ, PA, MD, and DE.
Every metalworking process generates airborne contaminants. The operations below are among the highest-risk sources in any metal shop.
Welding and plasma cutting vaporize base metals and coatings, releasing metallic oxides and silicates into the air. These fumes require targeted source capture before workers are exposed.
Grinding, deburring, and surface finishing release fine metallic particles that stay suspended long after work stops. Particle sizes are small enough to reach deep into the respiratory system.
CNC operations produce metallic chips, dust, and coolant mist that spread across a machining floor quickly. An active mist collection system often works alongside dust collection in these environments.
Laser cutting generates fume and smoke that include metallic particulate and byproducts from coatings or alloys. System selection must match the specific materials and production volumes involved.
Fine, dry metallic dust from deburring and polishing stays airborne long after work stops. Because these operations often occur throughout a facility, duct layout is as important as equipment selection.
Off-the-shelf and general ventilation equipment cannot reliably manage metalworking contaminants. Particle sizes, material types, and production volumes require systems engineered for your specific processes.
Dust from metals such as aluminum, magnesium, and titanium is classified as combustible under NFPA 652 and NFPA 654. Facilities working with these materials need collection systems specifically evaluated for that risk.
OSHA sets permissible exposure limits for welding fumes, hexavalent chromium, manganese, and other metalworking contaminants. A properly designed metalworking dust collection system is one of the most effective engineering controls available.
Our team has designed metalworking dust collection systems for a wide range of operations, including:
Air Purifiers, Inc. works with your team to assess your facility and design a system built for your specific processes. Most metalworking environments benefit from a combination of the system types below.
Cartridge collectors are a strong choice for fine metalworking dust and fumes from grinding, polishing, laser cutting, and welding. Configurations range from single-unit workstations to large central systems, with HEPA after-filter options available.
Baghouse collectors are built for heavy dust loads and high-volume production. They are well suited for fabrication facilities running continuous operations across multiple dust-generating processes.
Extractor arms capture contaminants at welding stations and grinding cells before they can spread. Downdraft tables pull dust and fumes through the work surface during grinding, deburring, and finishing.
Ambient air cleaners provide whole-facility filtration where source capture alone does not cover the full production floor. They work best as a complement to source capture in active metalworking environments.
Your facility gets a system designed around your actual processes, your layout, and your compliance requirements. A certified sales engineer comes to you first, assesses the operation in person, and builds a recommendation from there.
From installation through ongoing maintenance, you work with one team that knows your equipment and your facility. We also service many brands, so you are covered regardless of what is already installed.
Air Purifiers, Inc. provides a free on-site evaluation to assess your processes, contaminant sources, and facility layout. From there, our certified sales engineers design a system configured specifically for your operation.
We supply equipment from established industrial manufacturers, handle professional installation, and provide ongoing maintenance and filter service for the systems we install and many other brands. Schedule service online at any time.

If your facility is in our service area, our team is ready to come to you. We work with industrial, commercial, and government operations throughout Connecticut, New York, New Jersey, Pennsylvania, Maryland, and Delaware.
Not sure if we cover your area? Reach out and we will let you know.

Your facility is generating metalworking dust and fumes right now. The question is whether your current system is keeping up.
Air Purifiers, Inc. provides free on-site evaluations for metal shops and fabrication facilities in CT, NY, NJ, PA, MD, and DE. We will assess your operation and give you a clear picture of the right solution. Contact us today to get started.
Our certified sales engineers have been answering these questions for more than 40 years across industrial, commercial, and government facilities. If your situation is more complex than what is listed below, reach out and we will talk through it directly.
It depends on your processes, materials, and facility layout. Cartridge collectors handle fine dust and fumes well. Baghouses suit heavy, high-volume loads. Most metalworking facilities benefit from a combination, and a site assessment is the most reliable starting point.
Dust from aluminum, magnesium, and titanium is classified as combustible under NFPA standards. If you work with light metals or mixed materials, your system must be evaluated for that risk before you select equipment.
In many cases, yes. Centralized systems with properly designed ductwork can serve multiple workstations and process types. We design metalworking dust collection systems for your full facility, not one workstation at a time.
Yes. Every system Air Purifiers, Inc. installs is designed for your specific facility, processes, and compliance requirements. We assess before we recommend — always.